Free Shipping on orders over US$39.99 Ejuice Connect Official Site

FreeMax Maxus 2 Kit

8.1
Expert ScoreRead review
  • Class Leading 5-200W Output
  • 0.69″ Large Screen Display
  • Intuitive Firing Bar
  • Advanced Temperature Control
  • Ni200 Nickel, Titanium, SS316L Support
  • Custom TCR Adjustments

$49.99

Added to wishlistRemoved from wishlist 0
Categories: ,

FreeMax Maxus 2 Kit – Powerful & Versatile 200W TC Vape Starter Kit

Introducing the brand new FreeMax Maxus 2 Kit, featuring the powerful Maxus 2 Mod capable of 5-200W output with advanced temperature control and the versatile M Pro 3 Sub-Ohm Tank with slide top-fill design and dual adjustable airflow. This is one of the best vape starter kits available that caters to both beginners and experienced vapers with its variety of output modes and coil options.

Maxus 2 Mod Overview

The Maxus 2 Mod takes everything that was great about the original Maxus mod and improves upon it. The zinc alloy & leather construction gives it a stylish and durable exterior while the oversized display screen and intuitive firing bar make operation easy. It can fire up to a massive 200 watts in variable wattage mode and supports Ni200 Nickel, Titanium, and SS316L temperature control coils with adjustable TCR functionality.

An enormous 4500mAh built-in battery powers the Maxus 2, among the largest found in any dual battery mod on the market today. It charges via Type C USB to quickly juice up the cell when you need it. The battery door uses strong magnets to keep it securely closed, yet it’s effortless to remove when you need to swap out batteries.

With the ability to be used with either one or two high drain 18650 batteries, you get the versatility to tailor your vaping experience. Use a single cell for lighter, more portable all-day vaping or insert two batteries for extreme power and massive battery life lasting you days on end. The Maxus 2 intelligently detects the number of batteries installed and self configures for optimal performance.

Maxus 2 Mod Features:

  • Class Leading 5-200W Output
  • 0.69″ Large Screen Display
  • Intuitive Firing Bar
  • Advanced Temperature Control
  • Ni200 Nickel, Titanium, SS316L Support
  • Custom TCR Adjustments
  • Powerful On-Board 4500mAh Battery
  • Type C Quick Charging
  • 1 or 2 High Drain 18650 Batteries
  • Zinc Alloy & Leather Construction
  • Magnetic Battery Door

M Pro 3 Sub-Ohm Tank Overview

The FreeMax M Pro 3 Tank included in the kit takes the performance of the Maxus 2 to the next level. It uses FreeMax’s proven mesh coil technology to produce incredible flavor and vapor production. The press fit coils make replacement easy and the variety of options available provide the versatility to handle both high wattage cloud chasing and lower wattage mouth-to-lung vaping.

Sliding top-fill makes refilling the large 5.5ml ejuice reservoir a breeze. Just slide open the locking mechanism and fill to the top through the mess-free kidney shaped ports. Side adjustable airflow lets you dial in the perfect draw and the ultem and stainless steel construction give striking aesthetics. It looks and performs phenomenically on the Maxus 2 Mod.

M Pro 3 Tank Features:

  • FreeMax Mesh Coil Technology
  • 0.15ohm M1-D Mesh Coil (rated 60-80W)
  • 0.2ohm M2 Mesh Coil (rated 50-70W)
  • Large 5.5ml Ejuice Capacity
  • Slide Open Top Fill Design
  • Dual Adjustable Bottom Airflow
  • Press Fit Coil Installation
  • Stainless Steel & Ultem Construction
  • 27mm Diameter

Maxus 2 Kit Includes:

  • 1x Maxus 2 Mod
  • 1x M Pro 3 Sub-Ohm Tank
  • 1x 0.15ohm M1-D Mesh Coil
  • 1x 0.2ohm M2 Mesh Coil
  • 1x Spare Glass Tube
  • 1x Type C USB Cable
  • 1x User Manual
  • 1x Warranty Card

Using The Maxus 2 & M Pro 3 Tank

Battery Installation

The Maxus 2 is designed to work with either one or two high drain 18650 batteries (batteries sold separately). For normal vaping needs, a single 18650 battery will provide great battery life. For extreme power and maximum battery life spanning multiple days, install two batteries.

To install batteries, remove the magnetic battery door by pulling it away from the mod. Insert your battery or batteries into the compartments with the positive terminals facing down toward the firing bar. Replace the battery door to get started.

Powering On and Off

Press the firing bar 5 times in rapid succession to power on the Maxus 2. To power off, press the firing bar 5 times again.

Changing Output Mode

Click the firing bar 3 times to cycle through the different output modes which include:

  • Power – Variable Wattage
  • VPC – Variable Power Curve
  • Bypass
  • TC-Ti – Temperature Control for Titanium
  • TC-Ni – Temperature Control for Nickel
  • TC-SS – Temperature Control for SS316L
  • TCR – Custom TCR mode

Adjusting Wattage

With the device powered on in Power mode, hold the (+/-) adjustment buttons to increase or decrease wattage to your desired setting up to 200W max. Wattage can be adjusted in 0.1W increments.

Locking Resistance

When using temperature control coils, you’ll need to lock the baseline resistance after attaching an atomizer. With a TC coil installed and filled with ejuice, press and hold the firing bar and (+/-) buttons simultaneously to lock resistance. This stores the coil’s room temperature resistance value to ensure an accurate vaping experience.

Filling The M Pro 3 Tank

The M Pro 3 tank has a convenient slide top fill design. To access the fill ports, press and slide open the lock located on the top cap. You’ll see two large kidney shaped ports ready for filling. Drip or pour ejuice directly into the ports until filled near the top.

When full, slide the lock back into place to seal the tank. Avoid overtightening. Let the tank sit for 5-10 minutes to fully saturate the wick before vaping.

Adjusting Airflow

Airflow on the M Pro 3 tank is fully adjustable to cater to both mouth-to-lung and direct lung vaping styles. On the base of the tank you’ll find dual cyclops style airflow slots. Rotate the airflow control ring to open or close the slots to your desired setting.

Coil Installation

The M Pro 3 tank uses push-to-fit coil installation for quick and easy replacement. First unscrew the base and empty any excess ejuice. Insert your new coil into the chimney and press down until it clicks securely into place. Reattach the base and refill with ejuice. Let the coil soak for 5-10 minutes before vaping on a new coil.

Start at a lower wattage when you install a new coil. Slowly increase to the recommended wattage range printed on the coil to break it in properly and maximize lifespan. Enjoy exceptional flavor and vapor production from the FreeMax M Pro 3 tank!

Maxus 2 Kit Review Summary

The FreeMax Maxus 2 Kit is the ultimate versatile vape starter kit that performs amazingly with the wide range of output options and the excellent M Pro 3 sub-ohm tank. The large built-in battery provides all day vaping from the powerful Maxus 2 mod that can push up to a whopping 200 watts! Combined with the FreeMax mesh coils, you get phenomenal flavor and vapor to satisfy even the pickiest vapers.

From casual mouth-to-lung vaping to intense cloud chasing, the Maxus 2 Kit handles it all. Beginners will appreciate the simple operation and convenience while experienced vapers will love the extreme power and customization available. Overall if you’re looking one of the best and most versatile starter kits that can do it all, pick up the FreeMax Maxus 2 Kit!

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “FreeMax Maxus 2 Kit”

Your email address will not be published. Required fields are marked *

FreeMax Maxus 2 Kit
FreeMax Maxus 2 Kit

$49.99

Ejuice Connect
Logo
Shopping cart